Prince Manufacturing HC-PTO-1A PTO Pump, Aluminum

Prince Manufacturing HC-PTO-1A PTO Pump, Aluminum

---

מדורג ע״י יותר מ- 4 צרכנים, יותר מ- 99% מהביקורות על Prince Manufacturing היו בעלות סנטימנט חיובי, כלומר הצרכנים שקנו את המוצר ימליצו עליו בסבירות גבוהה כאשר יתבקשו לציין משאבות מומלצות.

PTO Drive is 6 Tooth DriveActual displacement: 9.9 CI/Rev, Porting location: Side, Center Section: Aluminum, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found in traditional pumps or imported pumps.

מאפיינים: ( תרגום אוטומטי עבור למקור )

• Prince PTO pumps have self adjusting wear plates that seal around the two unequal size gears, These plates activated by internal fluid pressure, offset wear or expansion
• All pumps are provided with an inlet port adapter SAE O ring boss to hose barb and outlet port adapter SAE O ring boss to female pipe threads
• Oil operating temperature should not exceed 180 degrees F If it does, the reservoir may be too small or a heat exchanger may be needed
• Prince PTO pumps are designed to operate at up to 100% of standard PTO shaft speeds Standard speeds are 540 rpm and 1000 rpm
• Prince pumps are designed for 2250 PSI max, relief valve setting A relief valve, external to the pump, must be provided in the system

זיהוי:

• יצרן: Prince Manufacturing
• מודל: HC-PTO-1A .
• מספר יצרן: HC-PTO-1A .

מידות ונתונים:

• מותג : Prince Manufacturing
• צבע : Gray
• מספר פריטים : 1
• מספר קטלוגי : HC-PTO-1A