מדורג ע״י יותר מ-
38
צרכנים, יותר מ-
68%
מהביקורות על
DIYmall למתאם כבלים טורי
היו בעלות סנטימנט חיובי, כלומר הצרכנים שקנו את המוצר ימליצו עליו בסבירות גבוהה כאשר יתבקשו לציין
כבלים serial וכבלי usb
מומלצות.
Feature:
FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset.
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
RX and TX LEDs indicator
The cables are available with a 6-way SIL, 0.1" connector
TTL levels is 3.3V
The TTL-232R cables are a family of USB to TTL serial UART
converter cables incorporating FTD's FT232RQ USB to Serial
UART interface IC device which handles all the USB signalling and protocols.
The cables provide a fast, simple way to connect
devices with a TTL level serial interface to USB Each TTL-232R cable contains a small internal electronic circuit board,
utilising the FT232R, which is encapsulated into the USB connector end of the cable.
The other end of the cable comes with a selection of different connectors supporting various applications .
Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V.
Cables are available with a 6-way SIL,0.1"pitch connector
The USB side of the cable is USB powered and USB 2.0 full speed compatible.
Each cable is 0m long and supports a data transfer rate up to 3 Mbaud
1 - Black:GND
2 - Blue:CTS
3 - Red:5V
4 - Green:TXD
5 - White:RXD
6 - Yellow:RTS
Package Included:
1 X USB to TTL Serial Cable
מאפיינים:
(
תרגום אוטומטי
עבור למקור
)
-
FTDI based USB to TTL Serial Cable are designed using the the standard FT232BL chipset
-
Please note that this cable supports very low power devices 5V.
-
It can work with Raspberry Pi serial console
-
RX and TX LEDs indicator TTL levels is 3.3V UART interface IC device which handles all the USB signal and protocols
-
What you will get is 1 X USB to TTL serial cable
-
Driver link http www.ftdichip.com Drivers VCP.htm
-
FTDI based USB to TTL Serial Cable are designed using the the standard FT232BL chipset Chinese chip
-
RX and TX LEDs indicator TTL levels is 3.3V UART interface IC device which handles all the USB signal and protocols
-
What you will get is 2 X USB to TTL serial cable