Opto 22 SNAP-B8MC Snap B-Series 8 Module Rack with Extra Terminal Block

Opto 22 SNAP-B8MC הצמד B-Series 8 מודול ארון עם בלוק טרמינל נוסף

---

The SNAP-B8MC rack mounts a compatible SNAP brain (such as the serial B3000 or the SNAP-UP1-ADS) and eight SNAP I/O modules. Digital modules can be placed in the first eight positions only. Field devices are wired to top-mounted removable connectors on the SNAP I/O modules. This rack also provides a screw-type terminal strip for field wiring common connections such as loop power distribution. SNAP B-series mounting racks are designed to hold an intelligent SNAP I/O processor - either a SNAP brain or an on-the-rack controller - and several I/O modules. This rack family includes racks that are compatible with ARCNET and serial SNAP brains, including those using Modbus and Profibus protocols and with some Ethernet-based SNAP Ultimate I/O on-the-rack controllers and SNAP Ethernet I/O brains. Since SNAP analog, digital and serial I/O modules have the same footprint, customers using most SNAP B-series racks can mix modules on the same I/O mounting rack. However, module types, features and positions on the rack vary depending on the capabilities of the brain or on-the-rack controller used. Field devices are wired directly to the top-mounted removable connectors on the modules plugged into each rack. The module and rack design allows modules to simply snap on and off the mounting rack. SNAP racks use a retention rail locking system that holds modules securely to the rack. Normally, a hold-down screw is not required. However, for applications that require additional module security, SNAP racks have provisions for two 4-40 by 1/2" standard machine screws to hold each module in position. MC model racks provide an auxiliary screw-type terminal strip for field wiring common connections such as loop power distribution. MC racks use a fixed terminal strip, while MC-P racks use removable connectors for easy maintenance. All SNAP racks offer panel mounting and the option of DIN-rail mounting. SNAP racks require a 5 VDC power source.

Underwriters Laboratory, Factory Mutual, Canadian Factory Mutual, IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement

מאפיינים: ( תרגום אוטומטי עבור למקור )

• אבטחת הרכבה עבור הצמד אני מודולים O בתוספת המוח הצמד או על בקר הצמד מתלה
• מודולים אנלוגיים, דיגיטליים וטוריים על אותו מתלה
• פאנל או הרכבה DIN הרכבה
• מודולים נכנסים למקומו
• צריכת חשמל 2 דרישות 5.0 ל 5.2 VDC ב 2.6 אמפר מקסימום

זיהוי:

• מספר יצרן: SNAP-B8MC .

מידות ונתונים:

• מותג : Opto 22
• מספר פריטים : 1
• מספר קטלוגי : SNAP-B8MC