1, Foot Switch AUse this as a switch for the device connected to Jack A or Jack B&A. Refer to "Connections".
2, Foot Switch BUse this as a switch for the device connected to Jack B or Jack B&A. Refer to "Connections".
3, Foot Switch A Indicator When foot switch A is set to the latch type function, this indicator alternately lights or goes out each time the foot switch is pressed. When foot switch A is set to the momentary type function(open or close), thisindicator lights only while the foot switch is held down.
4, Foot Switch B IndicatorWhen foot switch B is set to the latch type function, this indicator alternately lights or goes out each time the foot switch is pressed. When foot switch B is set to the momentary type function(open or close), this indicator lights only while the foot switch is held down.
5, DC JackThe NMP-2 uses 9V (Positive outside, Negative inside) 2.5mm plug to active Latch mode, open mode(also close mode with indicator).
6, Jack AConnect the device being controlled with foot switch A here. Use a connection cable with 1/4" (6.35mm) phone plugs at both ends.
7, Jack B&AConnect devices equipped with TRS or TS 1/4" (6.35mm) phone jacks here. Use a connection cable with stereo or mono 1/4" (6.35mm) phone plugs at both ends.
*TS(mono) is for foot switch B only. If you want to operate foot switch A and foot switch B at the same time, you must use TRS(stereo) phone plugs here.
8, Mode SwitchThis sets the functions for foot switch A and B to LATCH or Momentary( Open , Close).
*After referring the owner's manual for the device you are connecting, switch this to the appropriate setting.
Open mode means while you hold the foot switch, the Tip and Sleeve is opened.(using mono cable)
Close mode means while you hold the foot switch, the Tip and Sleeve is closed.(using mono cable)
מאפיינים:
(
תרגום אוטומטי
עבור למקור
)
-
This unit combines the functions of latch type and WTB 005 momentary type foot switches. Both of the unit s foot switches may be set to function as either a latch or momentary type Open, Close switch
-
You can connect to gear equipped with TRS 1 4 6.35 mm Phone jacks using a connection cable with stereo 1 4 6.35 mm phone plugs at both ends
-
It also could be used while close mode even passive status
-
It is a multi foot controller specially designed for arranger instruments Keyboards, Modules, Effect pedals...etc Using this controller you can easily active all the main functions of the equipment
-
This unit combines the functions of latch type and WTB 005 momentary type foot switches. Both of the unit s foot switches may be set to function as either a latch or momentary type Open, Close switch
-
You can connect to gear equipped with TRS 1 4 6.35 mm Phone jacks using a connection cable with stereo 1 4 6.35 mm phone plugs at both ends
-
It is a multi foot controller specially designed for arranger instruments Keyboards, Modules, Effect pedals etc Using this controller you can easily active all the main functions of the equipment