ARCTIC F12 PWM

ARCTIC F12 PWM Rev.2

מאפיינים: ( תרגום אוטומטי עבור למקור )

• INNOVATIVE DESIGN ENABLES QUIET AND EFFICIENT VENTILATION The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• PERFECT CASE FAN REGULATION WITH PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This s the required cooling and minimizes the noise level
• TWO WAY INSTALLATION Blow warm air out of the case. Draw cool air into your case
• LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life
• TECHNICAL DATA Fan speed 230 1350 RPM, Airflow 53 CFM 90, 1 m h, Noise Level 0, 3 Sone, Pin 4 pin
• Air flow , 56.3 CFM. Noise level , 0.3 sone
• OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure
• 200 TO 1800 RPM REGULATED VIA PWM Thanks to 4 pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym Iron Boron Magnet ring of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors
• EXTENDED LIFE SPAN A 10 C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA Fan speed 200 1800 RPM, Airflow 56.3 CFM 95.65 m h 1800 RPM , Noise Level 0.3 Sone 1800 RPM , Pin 4 pin
• OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure
• 200 TO 1800 RPM REGULATED VIA PWM PST Thanks to 4 pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym Iron Boron Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors
• OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure
• JAPANESE DUAL BALL BEARING The premium quality Japanese dual ball bearing allows continuous operation 24 7 without the slightest compromise in performance
• MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym Iron Boron Magnet ring of the newest generation, which allows the new P12 PWM PST CO to run much more efficiently than its predecessors
• OPTIMISED FOR STATIC PRESSURE The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators
• HIGH QUALITY BEARING Thanks to an alloy lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved
• INNOVATIVE DESIGN The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level
• LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA Fan speed 1800 RPM, Airflow 56.3 CFM 95.65 m h 1800 RPM , Noise Level 0.3 Sone 1800 RPM , Pin 3 pin
• OPTIMISED FOR STATIC PRESSURE The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 Silent is particularly suitable for use on heatsinks and radiators
• VIRTUALLY SILENT MOTOR At low fan speed, the motor is the main source of unwanted noise, a motor developed in Germany with an enhanced bearing reduces friction and noise
• HIGH AIR RESISTANCE Thus, the P12 Silent is especially effective when used on heatsinks and with higher air resistance, the motor of the fan was developed in Germany and is virtually silent
• TECHNICAL DATA Fan speed 1050 RPM, Airflow 24.1 CFM 40.95 m h 1050 RPM , Noise Level 0.08 Sone 1050 RPM , Pin 3 pin
• INNOVATIVE DESIGN Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• PERFECT CASE FAN REGULATION WITH PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed, this guarantees the required cooling and minimizes the noise level
• PWM SHARING TECHNOLOGY PST PST assures that all of your fans listen to one control signal, e.g. you share the CPU Cooler s PWM signal and assure that your case fans stand down at low load and spin up whenever necessary
• TECHNICAL DATA Fan speed 230 1350 RPM, Airflow 53 CFM 90.1 m h 1350 RPM , Noise Level 0.3 Sone 1350 RPM , Pin 4 pin